Contact Us

Ningbo Bote Auto Sealing Co.,Ltd

Address: 818# North Danshan Rd, Cixi, Ningbo, Zhejiang, China

Tel: +86-574-63028855

M/P: +8615990580000

E-mail: manager@botegasket.com

How To Use High-quality Stainless Steel Wound Gasket?

- Nov 08, 2017 -

Stainless steel wound gasket is widely used in petroleum, chemical, metallurgy, power generation, shipbuilding and other industries, is the current pressure piping, valves, pumps, heat exchangers and other equipment of the key components of static seals. The choice and use of high-quality metal wound gasket products, to reduce and eliminate running, dripping, leaking, to ensure that the host equipment safety, pressure piping normal operation, has very important significance.


The following points should be noted when installing stainless steel wound Gaskets:


1, before installation carefully check the flange, bolts, nuts and gaskets of the quality, carefully check the flange or interface installation, there are no bias, wrong mouth, open mouth, wrong hole and other defects.


2, flange or seal surface must clean up, gasket surface and bolts, thread does not allow adhesion mechanical impurities.


3, gaskets can not be installed, should ensure that the pressure evenly.


4, tighten the nut should be evenly, the bolt should be symmetrical, evenly divided 2 times-3 times to tighten, so that the gasket pressure evenly.


Related News

Related Products

  • SWG Inner Ring and SWG Outer Ring
  • JIS Standard Spiral Wound Gasket
  • Low Load Spiral Wound Gaskets
  • Spiral Wound Gasket for Heat Exchanger
  • Expanded Graphite Sheet
  • Motorcycle Exhaust Muffler Seal Ring